Posted 18 February 2009 - 01:42 PM
Doming is a finishing process that applies crystal-clear, liquid
polyurethane in a metered dose to the top surface of a decal. The
liquid resin, which has the consistency of honey, flows to the edge of
the decal and is trapped by capillary attraction, thus preventing the
resin from overflowing past the edge of the vinyl decal. The liquid
is then cured to produce a finished product with a domed, bubbled, or
lens effect / appearance. This provides an incredible 3 dimensional
effect on the decal, and also offers a substancial amount of
protection from scratches, etc. Unlike epoxy, polyurethane will NEVER
turn yellow- even with years of sun exposure.
These bowties below are computer-cut and fit just perfect over the OEM door/tailgate badges (but you can stick them to practically ANY smooth, flat surface- cell phones, computers, toolboxes, etc).
1-color DOMED badge
bowties (no logo) are $4 each, or $10 for a set of 3
2-color DOMED badge
bowties are $6 each, or $16 for a set of 3
1-color DOMED Steering wheel
bowties (sorry-no logo available, fit 99+ only) are $3 each
Prices INCLUDE USPS First Class Mail shipping with delivery confirmation (Paypal orders only). Add $3 if you want Priority Mail shipping.
To pay via Paypal and for any questions (NO PM's):
DeVriesSigns over @t GMAIL.com
Steering wheel overlay, simulated "carbon fiber":
Black badge overlays:
Another close shot of domed "chrome" ones:
Some 2-color examples:
Posted 18 February 2009 - 01:49 PM
Domed wheel center cap overlays are very popular (and withstand the abuse much better than a non-domed decal would):
Posted 18 February 2009 - 10:08 PM
Posted 18 February 2009 - 10:33 PM
Posted 18 February 2009 - 10:36 PM
Imagine your olive drab paint with 1/16in of clear coat on top of it.
Posted 18 February 2009 - 10:42 PM
Posted 19 February 2009 - 12:31 PM
that idea of a domed zr2 spash would be neat
Posted 23 February 2009 - 05:57 PM
Posted 23 February 2009 - 05:58 PM
Posted 23 February 2009 - 06:01 PM
These are 1in x 4.5in.
I'm sure cowl hood rises vary, so you'd have to measure to see how they'd fit. Maybe cut a piece of paper to that exact size and tape it on- stand back and see how it'd look.
Of course I can make them in other sizes, too.
Posted 25 February 2009 - 05:05 PM
Posted 25 February 2009 - 05:09 PM
BTW, here is the AC canister one that I posted in another thread:
Posted 03 March 2009 - 12:10 PM
Posted 03 March 2009 - 08:47 PM
not to mention ALL over in his section
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users